JWL (Architectural Ironmongers) Ltd
0 Items
Tel: 0115 942 2808

Intumescent Products

Filter by brand

Filter
  • Therm-A-Seal Intumescent Strip

    Therm-A-Seal Intumescent Strip

    Therm-A-Seal is made from a unique chemical formulation based on expandable graphite. The seal is supplied in a PVC casing of various colours. The core material Therm-A-Flex is capable of large expansion combined with significant pressure forming an excellent seal against the ingress of fire.

    Unlike many other types of intumescent material, Therm-A-Seal is not affected by moisture and therefore does not require any further protection; it is also unaffected by carbon dioxide.

    Available in the f...

    Click Here
  • Therm-A-Stop Intumescent Strip

    Therm-A-Stop Intumescent Strip

    THERM-A-STOP has been designed for use in fire resisting door assemblies which have been designated as smoke control doors. The seal slows the spread of smoke and fire through a building by reducing the flow of smoke and air through the gaps between the leaf and the frame or an adjacent leaf edge during the early stages of a fire. Activated by heat, the material rapidly expands to seal the air gaps between the leaf and frame, insulating and protecting the gaps - thereby significantly slowing the...

    Click Here
  • Therm-A-Blade Intumescent Strip

    Therm-A-Blade Intumescent Strip

    THERM-A-BLADE is a flexible elastomeric insert which has been developed to give maximum fatigue resistance ensuring a long and satisfactory life when installed into a 3 to 4mm gap between the door edge and the frame.

    Narrower gaps than this will shorten the life of the smoke seal. Larger gaps will not be a problem provided that the seal bridges the gap. The seal is fitted into a PVC holder containing THERM-A-FLEX graphite for outstanding fire performance.

    Available in the following sizes:

    •...

    Click Here
  • Seal Type IF30

    Seal Type IF30

    IF30 fire seals have been tested and approved by Certifire to conform to BS476 part 22. This is the most demanding 3rd party certification scheme in the industry.

    IF30 Intumescent Fire Seal has beentested by TRADA. A 30 minute fire-resistance rating was achieved when used in conjunction with a 30 minute fire door. Copies of tests reports are available on a request

    Click Here
  • Seal Type IF60

    Seal Type IF60

    IF60 fire seals have been tested and approved by Certifire to conform to BS476 part 22. This is the most demanding 3rd party certification scheme in the industry.

    IF60 was tested by TRADA. It was fitted to a 6o minute door assembly and achieved an integrity rating of 71 minutes.

    Click Here
  • Seal Type N30

    Seal Type N30

    N30 fire and smoke seals have been tested and approved by Certifire to conform to BS476 part 22. This is the most demanding 3rd party certification scheme in the industry.

    N30, fitted to a 30 minute fire door, was tested by TRADA. It retained stability, integrity and insulation well in excess of the 30 minute rating. Copies of test reports are available on request.

    Click Here
  • Seal Type N60

    Seal Type N60

    N60 fire and smoke seals have been tested and approved by Certifire to conform to BS476 part 22. This is the most demanding 3rd party certification scheme in the industry.

    N60, with flame-retardant elastomeric draught/smoke blade insert, was tested by TRADA, in conjunction with 60 minute assembly. Stability and integrity were retained for 71 minutes. Copies of test reports are available on request.

    Click Here
  • Seal Type IMN/IMP

    Seal Type IMN/IMP

    IMN/IMP fire and smoke seals have been tested and approved by Certifire to conform to BS476 part 22. This is the most demanding 3rd party certification scheme in the industry.

    An IMN/IMP0 combination seal with elastomeric blade insert, has been tested on a double leaf, timber door assembly, by TRADA. A fire resistance in excess of 60 minutes was achieved. Copies of test reports are available on request.

    Click Here
  • Seal Type N60/IMP

    Seal Type N60/IMP

    N60/IMP fire and smoke seals have been tested and approved by Certifire to conform to BS476 part 22. This is the most demanding 3rd party certification scheme in the industry.

    The N60S seal, has been assessed by TRADA, as being capable of providing 60 minutes integrity when used in conjunction with the IMP seal.

    Click Here
  • Carripile 1, 2 and 3 Smoke & Draught seals

    Carripile 1, 2 and 3 Smoke & Draught seals

    Carripile 1, 2 and 3 seals are specifically designed for sliding sash applications. Designed for the verticals of box sash windows. They are particularly useful for applications such as patio doors and sliding sash windows.

    Carripiles have a PVCu carrier and polypropylene fin pile which provides an extra barrier against the weather.

    Available in the following finishes:

    • Black
    • White
    • Brown (not available for Carripile 1)

    Available sizes:

    • 5mm
    • 6.5mm
    • 8.5mm

    Click Here
Find Us On Facebook
Contact Us: telephone:0115 942 2808
email:

Opening Hours: Monday - Friday: 7.30 – 17.00
Saturday: 7.30 – 12.00

Send Us A Message:

***Enter Code To Stop Spam*
Address:

Gracol House
Mount Street
New Basford
Nottingham
NG7 7HX

Get Directions

Enter Your Postcode For Directions

We have placed cookies on your device to help make this website better. You can click the link below to disable cookies, otherwise, we'll assume you're happy to continue
Close This Notice

Disable Cookies | 3rd Party Data Processors